GAS SENSOR TRANSMITTER
Safe Area Detector Head / Junction Box Assembly
15J(S)/30J(D)-P1 Gas Sensor Transmitter Description
The 30J enclosure has been designed to allow quick and easy access to its interior by adjustment of two allen screws, this factor is a major consideration when large system service and calibrations are being carried out.
The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in carparks. Standard 4~20mA signalling with CANbus address enables the sensors to be networked via the GDS Combi control system or customer preferred monitoring system.
15J(S)/30J(D)-P1 Gas Sensor Transmitter Features
• Flexible output options
• CANbus, 4~20mA output
• Addressable or stand alone
• Hyper terminal communications rs232 line data and set up with 232 adapter
• Data logging
• Optional alarm relays
• Robust and weather-proof
15J(S)/30J(D)-P1 Gas Sensor Transmitter Specifications
• Power Supply: 15 to 30vDC 24v nominal
• Temperature: -15˚C to 55˚C
• Outputs:
3 wire - 4~20mA
4 wire - CANbus
Relays (optional)
Low alarm S.P.C.O
High alarm S.P.C.O
Fault alarm S.P.C.O / overrange
Rating 0.5A @30vDC
Inhibit option during servicing
1000um Big Active Area Photodiode For Optical Receiver,Website:http://www.gtellaser.com,Photodiode Module 1000um Big Active Area Photodiode For Optical ...