Operation Method
1. Put it on the plainness ground or the car body, make sure that the machine is steady, especially, keep the linking is fixedness and concentric between the motor and oil pump.
2. Correctly connect the power supply, start up oil pump and make sure the rotation direction is correct, or else, change the phase order.
3. Connect and fasten the each junction of the oil inlet pipe and outlet pipe, make sure that the connecting between oil outlet pipe and the oil outlet must be fasten, or else, the oil outlet pipe is easy to flush out when the pressure big.
4. Start up the motor when you fixed the oil inlet pipe and outlet pipe, then the oil pump operates normally. The used oil should be filtered three grades.
5. When a tank’s oil run out and need to filter another one, it is require to connect and fix the oil inlet pipe quickly, avoid the oil pump racing. Or else, you should stop the machine, and then start up the machine again when you connected and fixed the oil inlet pipe.

Ⅳ Maintenance
1. This machine mainly adopt the mechanical filter ways, progressively minish the density of the filter net, so approach to improve the filter precision. When the machine is operating, the first-grade is easy to be blocked, and then you will find that the capacity of oil outlet is smaller than inlet capacity.
Manage way: Open up the first-grade filter’s cover, take out the filter net and clean the net by the same oil, then the machine can work normally again.
2. If the lift is too high during the oil pouring process, it will increase the motor’s temperature and the oil pump’s noise quickly.
Manage way: (1) The lift according to the requirement. (2) Operate discontinuous
3. Oil pump’s noise abnormal
Mange way: (1) Check the oil pump’s connecting shaft, and make sure it is concentric (2) Fasten the bolt
4. It is prohibitive that the power lack of the phase.

Added: 13.03.2008 Offer viewed: 70 (hits)

 Other trade leads by this Member Related trade leads   Print this Page   Bookmark this ad !

Send an inquiry to vanilla xie relating to the offer by using bellow form:

Your name: * Email: * Your Company name: Tel: Fax: Address: Location (country): * Subject: * Message * The Security code: 6101 Type Security code into this field: