Machine size: L330*W330*H300mm
Voltage: 1ph, 220v;50/60Hz
Motor: 1HP, 0~12000rpm
Height of bevel:0~3mm, 45 degree
1.Equipped with inverter motor, range of speed
0~12000rpm, Depending on different materials do
different chamfering process.
2.Special for chamfering regular and irregular
curving surface, such as inner gap, complex curve
surface of inner or outer.
3. Available for chamfering workpeice with inner
diameter and inner gap width with 8mm or radian
with 4R or above.
4. Chamfer ability range: within 0~2C, 3R.
5. Workpecie with angle 45 degree after chamfered.
Voltage: 3ph, 220v-440v; 50/60Hz
Motor: 2HP, 3500rpm
Capacity: 0~14C, 0~20mm/45degree
Bevel angle: 15~45degree
Track size: 250*75*9mm ...
1. The guide rail is replace the inner slide rails double axis type HTK and HTK slider.
2. Self check switch,changed to the collision type,easy to replace.
3. Smoke exhaust ...