Silicon Rubber Increases Creepage Distance Skirt
)
Fluorine Silicon Rubber Increases Creepage Distance SkirtA. Purpose
The high temperature vulcanizing fluorine silicon rubber increases creepage distance skirt (climbs skirt for short) is used in equipment porcelain of the station with AC35-220kv and above. It can enhance the “flashover” voltage of serious defilement area effectively. It also good corrosionproof and aging resistance. After use this product, increases climbs’ effect is evidently, and the capability of flashover preventation and ice-flash preventation is improved effectively. The climbs skirt is light in weight. It is convenience to construct scene.
B. Structure and use
Climbs skirt is silicon fluorine rubber product. It is the only producer in china. It is detected by national authority institution. Its insulatibity, hydrophobic and mobility etc. are all better than general rubber products. When use in normal temperature, bond the umbrella skirt and porcelain by silicon fluorine bond. Attention to fill by bond at the opening joint, don’t leave clearance, make the umbrella skirt and porcelain to one thing. Clear odd bond after planish. The power can run after the surface is dry.
C. Size
Number
Specification (mm)
Number
Specification (mm)
1
Ø 50×Ø 270
30
Ø 275×Ø 510
2
Ø 95×Ø 240
31
Ø 280×Ø 486
3
Ø 96×Ø 240
32
Ø 280×Ø 490
4
Ø 110×Ø 340
33
Ø 280×Ø 520
5
Ø 125×Ø 310
34
Ø287×Ø 575
6
Ø 140×Ø 375
35
Ø 300×Ø 460
7
Ø 140×Ø 380
36
Ø 305×Ø 560
8
Ø 150×Ø 365
37
Ø 305×Ø 470
9
Ø 150×Ø 367
38
Ø 314×Ø 487
10
Ø 150×Ø 370
39
Ø 320×Ø 500
11
Ø 150×Ø 375
40
Ø 325×Ø 545
12
Ø150×Ø 380
41
Ø 345×Ø 540
13
Ø 150×Ø 385
42
Ø 345×Ø 565
14
Ø 150×Ø390
43
Ø 355×Ø560
15
Ø 150×Ø 490
44
Ø 360×Ø 510
16
Ø 160×Ø490
45
Ø 380×Ø 555
17
Ø 163×Ø 455
46
Ø 425×Ø 650
18
Ø 165×Ø455
47
Ø 427×Ø 675
19
Ø 167×Ø 380
48
Ø 430×Ø 590
20
Ø 170×Ø380
49
Ø 465×Ø 700
21
Ø 170×Ø 410
50
Ø 490×Ø 735
22
Ø173×Ø 467
51
Ø 510×Ø 745
23
Ø 173×Ø530
52
Ø 520×Ø 800
24
Ø 175×Ø 465
53
Ø 530×Ø 715
25
Ø 210×Ø425
54
Ø 545×Ø 766
26
Ø215×Ø 455
55
27
Ø270×Ø 475
56
28
Ø 275×Ø 485
57
29
Ø 275×Ø465
58
D. Bond
a) clear
Use clean cloth wipe the surface of porcelain, wipe off defilement.
b) Preassemble
Chose the umbrella skirt which inner diameter match up with the porcelain and the outer diameter accord with the request, carry on to pack.
c) Rubberize
Well-distributed rubberize on the surface of the scraper (about 0.5mm). Apply the bond of the same thickness at the opposite of umbrella skirt.
d) Suit
Case the rubberized umbrella skirt and well placed. Even press the surface in order to remove the air in the joint surface, remove odd bond.
E. Package and deposit
a) Pack with the box.
b) Decide the package number according to the different size of umbrella piece. Attach the introduction and inspection certificate.
c) Pack the bond by itself.
d) Deposit it at dry place, avoid contacting with oil and other harmful material.
e) Don’t pile up over three floors. Avoid breaking the package through transport.
f) Pay attention to avoid breaking the umbrella skirt by sharp weapon when open the box.
F. Order notice
a) Notice the type, size, number and deliver date in the order.
b) Contact unit: Hebei Silicon Valley Chemical Co., Ltd, High Voltage Electric Factory
Direct-current suspended type porcelain insulator increases climbs skirt
A. Purpose
Direct-current suspended type porcelain insulator increases climbs skirt is a new product of our company, special used in increase climb of direct current or alternating current suspended type insulator. The capacity usage and bond procedure are similar as above-mentioned increase climb umbrella skirt, but different with the structure.
B. Size
Model
FSX1—160
FSXZ1—210
FSXZ1—300
FSXZ2—160
Suit specification KN
Direct – current 160
Direct – current 210
Direct – current 300
Direct – current 160
Manufacture
Tangshan NGK
Tangshan NGK
Tangshan NGK
Dalian Porcelain Co.,Ltd
Increases Climb Skirt Climb distance mm
303
303
349
303
Increasing climb distance mm
185
185
193
180
Splice Area mm
884
884
1418
955
Increases Climb Skirt Weight Kg
2.2
2.2
3.1
2.2
Use glue consult quantity g
80
80
120
80
C. Increases climb skirt model explanation
FS——Product material structural style code, expressed the high temperature curing fluorine silicon material increases crawls the skirt.
X——Product characteristic code: the expression is suitable the direct-current suspended type porcelain
Insulator to increase climb skirt.
1——The expression is suitable the Tangshan NGK manufacture the porcelain insulator
2——The expression was suitable the porcelain insulation which made in Dalian.
3——Porcelain insulator intensity rank is 160、210、300 .
Other factory production porcelain, the glass spacer block may refer to the above target to select and purchase increase climbs skirt.
D. Bond
a) Chose the suit increase climb skirt in the table according to the insulator’s size.
b) Work should be in the environment of sunshine, no rain and snow, the temperature is not bellow five degree centigrade.
c) The bond way is similar as above-mentioned.
E. Package and deposit
a) Pack with the box.
b) In the box, it has five pieces increase skirts, five pieces lap pieces, bond, inspection certificate and introduction.
c) Deposit, transport and other attentions are similar as above-mentioned.
Added: 09.05.2008 Offer viewed: 22 (hits)| Member Information | |
| Sold by: | elis |
| Phone: | 86-310-7185888 |
| Your address: | No.5 Century Boulevard,Handan,Hebei |
| Company name: | Hebei Silicon Valley Chemical Co.,L |
| Location: | China |
Other trade leads by this Member Related trade leads Print this Page Bookmark this ad !
Click here to contact this member| No. | Related trade leads | Added | Location | Pic. |
| 1 | SVchem Sign Silicon Rubber Composite Insulator (26 hits) | China | No | |
| 2 | Rubber Speed Hump (HT-802) (22 hits) | China | No | |
| 3 | Traffic Safety (HT-806) (22 hits) | China | No |