General Specifications
Cable Type Series 6
Center Conductor Type Solid
Construction Type Non-armored
Dimensions
Cable Length 304.8 m | 1000 ft
Diameter Over Center Conductor Tolerance ±0.0004 in
Diameter Over Center Conductor, specific 0.0403 in per 1 strand
Diameter Over Dielectric 4.318 mm | 0.17 in
Diameter Over Jacket Tolerance ±0.006 in
Diameter Over Jacket, nominal 6.02 mm | 0.237 in
Diameter Over Shield (Braid) 5.207 mm | 0.205 in
Jacket Thickness 0.381 mm | 0.015 in
Jacket Thickness, minimum spot 0.254 mm | 0.01 in
Center Conductor Gauge 18 AWG
Shield (Braid) Gauge 34 AWG
Electrical Specifications
Capacitance 50.853 pF/m | 15.5 pF/ft
Characteristic Impedance 75 ohm
Characteristic Impedance Tolerance ±3 ohm
Conductor dc Resistance 28.6 ohms/kft | 93.832 ohms/km
Dielectric Strength, conductor to shield 2500 Vdc
Jacket Spark Test Voltage 2500 Vac
Nominal Velocity of Propagation (NVP) 84 %
Shield dc Resistance 6.4 ohms/kft | 20.997 ohms/km
Structural Return Loss 15 dB @ 1000-3000 MHz | 20 dB @ 5-1000 MHz
Structural Return Loss Test Method 100% Swept Tested
Material Specifications
Center Conductor Material Copper-clad steel wire
Dielectric Material Foam FEP
Jacket Material PVC
Shield (Braid) Coverage 90 %
Shield (Braid) Material Aluminum
Shield (Tape) Material Aluminum/Poly, bonded