3phase stepper motor driver JB3722 AC170-220V 7.0A 300 Micro

3phase stepper motor driver JB3722 AC170-220V 7.0A 300 Microsteps Matching 3phase stepper motor size 86mm 110mm 130mm

Brand Name:
Jingbo
Motor Type:
Stepper Motor
Model Number:
JB3722
Place of Origin:
Guangdong, China (Mainland)
Color:
White
Shape:
Rectangle
Condition:
New
Warranty time:
one year
Application:
Mechanical and automation equipment
Payment terms:
T/T, Paypal, Western union
Microstep:
300
Current:
7.0A
Voltage:
AC170-220V

Features

High performance, low price
16 channels constant angle and constant torque microstep, max revolution is up to 60,000 pulse/R
Upmost response frequency amounts to 200Kpps
Once the pulse stops over 1.5s, the phase current will be automatically reduced to half of pre-set current
Opto-isolated signal Input/Output
Driving current can be adjusted from 1.3A/phase to 7.0A/phase through 16 channels
Single power input, voltage range: AC170-220V
It can match 3 phase hybrid stepper motors whose current is under 7A, flange size ranges from 86mm to 130mm.
Phase memory function (Note: Once the input stops over 3 seconds, the driver will memorize the motor phase automatically so that it can restore the phase automatically when it is repowered or MF signals change from low level to high level.)

! Caution

1. The driver will automatically protect itself if the input voltage is lower than AC170V or higher than AC220V.
2. Input control signal is 5V, current-limiting resistance should be connected when it is over 5V, this driver comes with a 24V signal interface
3. The input pulse signal effects on falling edge
4. The driver’s cooling fan will work when the driver temperature is over 48C
5. ALM lights and the driver stops working when the driver temperature is over 80C. Until the temperature falls to 50C, it will restart to work after powered-up. The heat sink is needed when overheat occurs
6. ALM lights if it is short circuit, please check motor leads and eliminate other short faults, and then repower up to restore
7. ALM lights if the motor does not connect well with the driver, please check motor leads and repower up to restore