Wall Cladding Up And Down Stianless Steel Marble Angle Bracket

Specifications – AOZ Marble AngleProduct NameWall cladding up and down stainless steel marble angleMaterialstainless steel 304 316SizeAs the drawingsStandard ModelDIN, ASTM, JIS ,BS, AISI, NonstandardFinishpolish AnodizingCertificateCE,ISO9001,SGSMin Order2000pcsPacking Listin cartons and then on palletDelivery TermFOB/C&F/CIFDelivery Lead TimeWithin 20days after the order is confirmedPayment TermT/T ,L/C ,Paypal, and so onWall cladding up and down stainless steel marble angle  Projections between 40 and 130 mm Max. Permissible load 400 N to 500 N Distance to the substrate of the already installed stone panel can be adjusted by open-ended spanner via rivet nut HRM is completely pre-assembled with a spade bolt secured against becoming unscrewed HRC is supplied loose for assembly on-site Material: 1.4571/1.4404/1.4401 (A4/AISI 316) or 1.4301 (A2/AISI 304) 1,Make  slot at fixed side on the top and bottom of the stone. 2,Measure and adjust the horizontal spacing of stone 3,Adjust  the vertical distance of stone.4,Use the bracket fix the stone, then anchor into the wall.