It is mainly used for inner lead welding of high-power light-emitting diodes (LED), laser tubes (lasers), small and medium-sized power diodes, triodes, integrated circuits, sensors and some special semiconductor devices. "It is especially suitable for welding high-power LED."
Product selling point On the basis of the original, a high-power LED arc generation function has been added.
Main technical specifications
Use power supply AC 220 V ± 10 (AC 110 V can be customized), 50 Hz, 300 W, requires reliable grounding.
Applicable gold wire diameter 2050μm (0.82 mil).
Soldering temperature 60400.
Ultrasonic power Two-channel 03 W is continuously adjustable in two steps.
Welding time 2 channels 0100 ms.
Welding pressure two channels 35180 g
Minimum welding time 0.4 s/line.
The maximum automatic span from one weld to the second weld is not less than 4 mm in both directions.
The length of the tail wire is 0.2 mm.
The size of the gold ball can be set arbitrarily 24 times.
Fixture movement range Φ25 mm.
Vision System Stereo microscope and image monitor are optional.
Dimensions 700 (length) × 460 (width) × 550 (height) mm.
The weight is about 28 Kg.