Welded Wire Mesh Fence Panels

[url]https://www.linklandfence.comBRC Fence& Roll Top Fence
Material: Low carbon steel wire
Wire: 3.0mm-7.0mm
Mesh: 50*200mm,50*100mm, etc.
Height: 1.2m-3m
Width: 2-3m
Post: 60*60mm,80*80mm,60mmOD, etc.
Accessories: post caps, clips, nuts and bolts.
Surface treatment: Hot dipped galvanized, PVC coated, Powder coated
Packaging: pallets
Certificates: ISO9001, BV,SGS
Roll top fence has a unique and user-friendly closed and rolled beam section at the top and bottom edge of each panel with no sharp or raw edges, usually made from heavy 5 mm wires, which results in maximum rigidity and better safety. It is suitable where safety is a consideration, such as schools, sports, parks and playgrounds, and company premises.
 
Custom Roll Top Fence is also called BRC fence,the unique design ensures there are no protruding sharp edges. The panel is extremely rigid and with good see through visibility. This system is ideal where safety is paramount, creating an ideal for Parks and Recreational fencing, Playground fencing and School fencing. This roll top fence / BRC is very popular in Australia, Southeast Asia,Euro Market,etc
Welded Wire Mesh Fence Panels
The roll top fence panels are made from welded mesh using heavy-duty wire to achieve high strength and rigidity. The heights are available on request, uaually 1.2m to 2.4m, mesh sizes are 200 x 50mm , and 100mm x 50mm for the beam sections. The heavy wires guarantee strength and rigidity. Different sizes can be made according to customer detailed requirements.
  
Post
The posts for BRC fence are manufactured from hot dip galvanized 60 x 60mm or 60×80mm( others are available) square tube and 60mmOD round tube and are available from stock to suit fence heights of 1.2m or 2.4m. Longer posts for higher fences can be supplied. Panels are secured to the posts with steel clips and 6.0mm galvanized security fixings screwed into threaded inserts in the posts. All posts are supplied with protective plastic end caps.

Installation manner 
1.The post popular buried under the ground 600mm-800mm and pouring concrete when installation them.
2. Welded flange base under the post ,and use setscrews to install on the hard ground.
https://www.linklandfence.com/about-us/