This series pipe lathe machine is manual type, they are widely used in oil, chemical, geological prospecting industrial etc for kinds of pipe thread turning,especially suitable for tool joint rough machining and semi-finishing machining. It also can be used as conventional lathe, which can cut excircle surface, inner hole, end face, circular arc, taper, step, chamfer, metric/inch thread etc:
Items Unit HY-1320
Max. Swing diameter over bed mm φ680
Max. Swing diameter over saddle mm φ400
Max. Diameter of workpiece mm φ190
Max. Length of workpiece mm 1000
Manual chuck diameter mm φ500
Spindle speed range r/min 20~350
Spindle bore diameter mm φ200
Carriage quick moving speed m/min 3.8
Distance from tool base to spindle center mm 32
Tool section dimension mm 32×32
Tool rest turning angle ±90°
Spindle center height mm 1100
Max. Travel of horizontal tool rest mm 445
Max. Travel of small tool rest mm 200
Tailstock sleeve diameter mm 100
Tailstock sleeve stroke mm 250
Tailstock sleeve tape hole Mohs 5#
Tip taper Mohs 5#
Main motor model YPNC-33.3-11-B-B3
Main motor power kW 11
Roughness mm Ra1.6~Ra3.2
Machine weight ㎏ 5700
Machine dimension(L×W×H) mm 3700*2000*1600