Operation inspection of Precision metal coil slitting line

One of the operation inspections of the steel coil slitting machine is to check whether the lubrication is sufficient before and when the equipment is in operation;
afterwards, pay attention to check that the operation buttons of the electrical system before starting and stopping must be checked. It must be in the original position;
when the slitting equipment is operating, if abnormal conditions are found, it should be stopped for inspection, and there must be no looseness or damage on the transmission parts.
Another aspect of the slitting operation in sheet metal inspection of the slitting unit equipment is to check the reducer fixing screws and top screws, and pay attention to tightening;
the lower roll rotation and the upper roll lifting movement of the slitting rewinding machine should not be carried out at the same time;
The electrical system on the unit equipment should be regularly checked and dust removed, and the failed originals should be replaced in time.
Pay attention to check whether the grounding wire is firm, and the machine should not be overloaded or used unreasonably.
Complete process of metal slitting machine:https://youtu.be/m5qM6Y2XRcA
Details of coil slitting machine: www(dot)shsinopower(dot)com
Equipment and product technical consultation: stevenma(at)shsinopower(dot)com.