KRD17 series pneumatic bidirectional vertical shock test system is the new designed and developed for some large specimens that cannot or are not easy to turn over, especially for battery testing. It can complete vertical upward and downward shock tests.
• Air pressure drive, no pollution to the environment
• One machine with multiple functions, one clamping, to complete the upward and downward shock and bump tests, with high efficiency
• Built-in pneumatic brake mechanism, safe and reliable
• One-machine management for control and measurement, convenient operation
• Air springs and dampers are used to reduce vibration, and the installation is free of foundation
Technical Specifications
Model KRD17-50 KRD17-100 KRD17-200 KRD17-500 KRD17-800 KRD17-1000 KRD17-2000
Rated Load (kg) 50 100 200 500 800 1000 2000
Table size (mm) 500×500 600×600 800×800 1000×1000 1200×1200 1500×1500 2000×2000
Shock Direction Downward
Peak Acc. (G)
Half-Sine 10-750 10-600 10-450 10-300 10-250 10-200 10-150
Post-Peak Sawtooth 10-200 10-200 10-100 10-100 10-100 10-100 10-100
Trapezoid 15-200 15-200 15-100 15-100 15-60 15-60 15-50
Pulse Duration (ms) Half-Sine 1.5-60 2-60 2.5-60 4-60 4.5-60 5-60 6-60
Post-Peak Sawtooth 3~18 6~18
Trapezoid 3~18 3~18 6~18
Shock Direction Upward
Shock Wave Half Sine Wave
Shock Peak Acceleration (G) 15-350 15-300 15-200 15-150 15-100 15-100 15-75
Shock Pulse Duration(ms) 3.5-60 3.5-60 4-60 4.5-40 5.5-60 5.5-60 6-60
Overall Dimension (mm) 1250×1250×1600 1250×1250×1600 1300×1300×1700 1350×1350×1750 1550×1550×1750 1650×1650×1850 2000×2000×1900
Weight (kg) 3000 3200 3400 4000 5000 6000 8000
Power AC220V 土10%,50Hz
Air Source ≤1MPa
Installation Conditions No special foundation is required for installation, but a smooth cement floor is required. 800 ~ 1000mm working distance are reserved around the equipment
Working Environment Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense
Standards MIL-STD-810F IEC68-2-27
Hope to establish business relation with you sincerely. If you want to know more information about our products, kindly visit our website:
www.creditcme.com. Or feel free to contact me:
echo@creditcme.com