Two areas Thermal shock testing chamber

Two areas Thermal shock testing chamber
This chamber is suitable for the product (complete machine), parts, materials to estimate the ability to bear speedy temperature change. This test can know the influence caused by the temperature variation one or more times on the test samples. The main parameters to influence the temperature change test have the max. Value and min. Value of temperature change range, the hold time of the samples under high temperature and low temperature, the number of test cycle, etc.

High temperature area:
Temperature exposure range:+60...+200℃;
Preheating temperature upper limit: 200℃;
Heating time: R.T...+200℃: 40min (approximately);

Low temperature area
Temperature exposure range: 0...-75℃;
Precooling temperature lower limit:-75℃
Cooling time: R.T....-70℃: 60min (approximately);

Basket
Temperature range: -65...+150℃;
Temperature fluctuation: ≤1℃;
Temperature deviation: ≤±2℃;

Conversion time: ≤10 seconds;
Temperature recovery time:≤5 min.