3 areas Thermal shock testing chamber
This chamber is suitable for the product (complete machine), parts, materials to estimate the ability of bearing speedy temperature change. This test can know the influence caused by the temperature variation one or more times on the test samples. The main parameters to influence the temperature change test have the max. Value and min. Value of temperature change range, the hold time of the samples under high temperature and low temperature, the number of test cycle, etc.
Preheating area
Preheating temperature upper limit:200℃;
Heating time: R.T.~+200℃: 40min (approximately);
Pre-cooling area
Pre-cooling temperature lower limit:-75℃;
Cooling time: R.T.~-70℃: 90min (approximately);
Working area
Temperature shocking range
High temperature: 60℃~+150℃;
Low temperature: -55℃~-10℃;
Temperature fluctuation:≤±0.5℃;
Temperature deviation: ≤±2℃;
Temperature recovery time: ≤5min;
walk in Environmental Climate High and Low Temperature Test Room
This chamber is suitable for the product (complete machine), parts, materials to ...
Climate temperature humidity walk in stability chamber
This chamber is suitable for the product (complete machine), parts, materials to perform ...