Digital - Analog Lab

SPECIFICATION
Tesca 33503B Digital – Analog Training System is a versatile equipment designed for elementary as well as advance training of Digital and Analog electronics. The trainer covers regular digital & analog circuits by solder-less interconnections on breadboard through use of 2mm brass terminals and patch cords. Various function generators, logic level output indicators, multimeters and AC & DC regulated power supplies etc. Are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords and comprehensive Instruction manual.



Features

Regulated DC Power Supply : ±5 V at 0.2 Amp, +12 V/ 0 to 20V at 0.2A, and -12 V/ 0 to -20 V at 0.2 A
AC Supply : 5-0-5V, 10-0-10V at 100mA. Can be used as 5V, 10V and also as center tap
Multimeter : 2 Nos of on-board multimeters to measure AC & DC Voltage, Current, Resistance, diode and Continuity, etc.
Function Generator : Sine / Square / Traingular / Pulse waveform frequency 1 Hz to 110 Khz in 5 Steps. Variable in between steps. Sine / Square / Traingular waveform output 50mV ~ 10Vpp variable
Variable Resistors : 2 Potentiometers (1K, 100K)
Speaker : 8 ohms miniature speaker
Seven Segment Display : 2 Nos. BCD to Seven Segment Decoder/ Driver IC with terminals
Data Switch : 8 independent logic level inputs to select High / Low TTL levels
Pulser Switch : 2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of the counter after every clock pulse)
Logic Indicators : 8 independent LEDs indicators for High / Low status indication of digital outputs
Universal Socket : 3 Nos. BNC to 2 channel banana adapter
Fuses : 3 Nos. Of Fuses with terminals
Bread Board : Unique solder-less large size, spring loaded breadboard consisting of two Terminal Strips with 1280 tie points and 4 Distribution Strip switch 100 tie points each, totaling to 1680 tie points. (Size:112mmx170mm)
Power : 230 V ± 10%, 50 Hz
Accessories : Mains cord, Operating and Experimental manual
Instruction manual : Strongly supported by detailed operating instructions
Weight : 6 Kg. (Approx)
Dimension : W 400 x H 150 x D 300


EXPERIMENTAL COVERAGE:
ANALOG

Study of Diodes in DC circuits
Study of Light Emitting Diodes in DC Circuits
Study of Half wave rectifier
Study of Full wave rectifier
Study of Zener Diode as a voltage regulator
Study of transistor series voltage regulator
Study of transistor shunt voltage regulator
Study of Low pass filter
Study of High pass filter
Study of band pass filter
Study of CE configuration of NPN transistor
Study of CB configuration of NPN transistor
Study of CE amplifier
Study of Monostable multivibrator using transistor
Study of Bistable multivibrator using transistor
Study of Astable multivibrator using transistor
DIGITAL

Logic gates operation
To verify De-morgan’s theorem With boolean logic equations
Binary to Gray code conversion
Gray code to Binary conversion
Binary to Excess-3 code conversion
Binary Addition and Subtractor
Binary Multiplier
EX-OR gate implementation
Application of EX-OR gate
Johnson Counter
To verify the dual nature of Logic Gates
Study of Flip-Flops RS, JK, D&T
Multiplexer and Demultiplexer
4 Bit Binary up and down counter
Study of 8 to 3 Line Encoder
Study of 3 to 8 Line Decoder
Study of Shift Register (SIPO)
CMOS-TTL Interfacing
Study of Crystal oscillator
Study of pulse stretcher circuit


OPTIONAL MODULES:

Apart from above given experimental coverage of 16 + 20 experiments on breadboard, customers can purchase these optional modules. These are ready to use modules with wired components & circuit schematic drawn on top compatible to use with Digital-Analog Lab.