UHMW-PE mortar slurry pump

UHMW-PE Mortar pump

Anti-corrosion and wear-resisting mortar pump adopts semi-open impeller. It belongs to single-stage single-suction cantilever centrifugal pump. All the flow components are made of ultra-high molecular weight polyethylene lining. The pump is Suitable for liquid extraction and slurry transport.



Main parameters

Flow range: 3m /h-2600m /h

Lift head range: 5m-70m

Power range: 0.75kw-300kw

Suitable medium: acid, alkali, salt, organic solvent with moderate concentration (Concentration below 80% sulfuric acid, less than 50% nitric acid, various concentrations of hydrochloric acid, liquid alkali, both suitable for liquid and slurry.)

Operating temperature: -20℃ -- 90℃

Medium specific gravity: ≤2.0

K dynamic seal, soft packing seal, mechanical seal etc.



Features:

The pump has a wide range of use. Transportation of acid, alkaline liquid or slurry, All kinds of corrosive slurry in smelting industry, Dilute acids in the sulfuric acid industry, Environmental protection industry all kinds of sewage and so on.

Strong wear-resistance: Flow parts are made of steel lined with UHMW-PE.

Strong impact resistance

Excellent corrosion resistance.

Safe and reliable, non - toxic no decomposition. Suitable for food industry.

Anti adhesion (suitable for liquids with high viscosity), Low friction coefficient, no noise etc.