KRD11 Pneumatic Vertical Shock Bump Test Machine

KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and collision test, can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests.

 Pneumatic drive, simple structure and high reliability
 Pollution free, without hydraulic leak risk and keep the environment clean.
 Pneumatic drive greatly improves the shock test efficiency, maximum shock rate up to 120 times / min.
 It can easily realize large pulse width and small overload test.
 With a fast shock rate comparing to motor or hydraulic driven collision table, it has higher reliability and better collision waveform.
 The speed and rate of shock can be easily controlled by adjusting the gas pressure.
 IPS-2000 series shock control and measurement system can perform manual shock, continuous shock, single shock, and interval shock.
 Built-in brake mechanism ensures the safety of operation in any situation.

Technical Specifications
Model KRD11－5 KRD11－15 KRD11－25 KRD11－50 KRD11－100 KRD11－200 KRD11－400 KRD11－600 KRD11－800 KRD11－1000 KRD11－2000
Rated Load (kg) 5 15 25 50 100 200 400 600 800 1000 2000
Table Size (mm) 150×150 200×200 300×300 500×500 600×600 800×600 800×800 1000×800 1000×1000 1200×1200 1500×1200
Peak Acc. (g) Half-Sine 5-2.5k 5-2k 5-1500 10-750 10-600 10-450 10-400 10-300 10～300 10～250 10～150
Post-Peak Sawtooth 10-200 10-100 10-50
Trapezoid 15-200 15-100 15-60 15-50
Pulse Duration (ms) Half-Sine 0.5～40 1～40 0.6～60 1.5～60 2～60 2.5～60 3～60 3.5～60 4～60 4.5～60 6～60
Post-Peak Sawtooth 3～18 6～18
Trapezoid 3～18 6～18
Bump Waveform Half sine wave
Bump Peak Acceleration（g） 4~150 5～100
Bump Pulse Duration (ms) 2~30 3~30
Overall Dimension (mm) 1000×1000×2100 1200×1000×2200 1400×1200×2300 1600×1400×2300 1700×1500×2300 1700×1500×2300 1900×1500×2450 1900×1500×2450 2000×1500×2450 1900×1800×2550 2200×1800×2550
Weight (kg) 700 800 1000 1800 2500 2800 3800 4000 4800 5200 6000
Bump Rate(Times/Min) 10~120
Installation Condition
Environment Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense
Power AC220V±10%, 50Hz
Air source ≤0.8MPa
Floor No special foundation is required for installation, but a smooth cement floor is required. 800 ~ 1000mm working distance are reserved around the equipment
Standards MIL-STD-810F IEC68-2-27

If you want to know more information about our products, kindly visit our website:[url=https://www.creditcme.com/] Or feel free to contact me: echo@creditcme.com