The KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the reliability and structural integrity of the test unit in a horizontal impact environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, or square wave shock test to realize the shock energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure.
Windows-based stable control system, full-automatic remote-control interface
Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
Trapezoidal guide posts: large supporting force, good lubricity and full-automatic positioning table.
Automatic control of shock speed: the shock overload value is achieved by adjusting the air pressure. After the cylinder pressure is set, system will automatically control the shock speed with high accuracy and good repeatability.
Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator.
Multiple waveforms: can perform conventional half-sine waves, post-peak sawtooth waves, or square waves.
Easy installation: the device comes with a base, due to short driving stroke of the pneumatic cylinder, the footprint is small.
Integrated control & measurement system: the system comes with a variety of waveform tolerance bands that comply with the MIL-810 standard, automatically generates test reports after the test is completed.
System scalability: the system can be designed as a bidirectional shock according to user needs, saving test time more effectively.
Technical Specifications
Model KRD12-10 KRD12-50 KRD12-100 KRD12-200 KRD12-500 KRD12-1000 KRD12-2000 KRD12-3000
Rated Load (kg) 10 50 100 200 500 1000 2000 3000
Table Size (mm) 200×200 500×500 600×600 800×800 1000×1000 1200×1200 1500×1500 2000×2000
Peak Acc. (g)
Half-Sine 10-5k 10~1.5k 10~1k 10-800 10-600 10-500 10-200 10-150
Post-Peak Sawtooth 10~200 10~100 10~50
Trapezoid / 15~200 15~200 15-100 15-60 15-60 15-50 30-50
Pulse Duration (ms) Half-Sine 0.3~40 1~60 1.5~60 2~60 2.5~60 3~60 6~60 8~60
Post-Peak Sawtooth 3~18 6~18
Trapezoid / 3~18 6~18
Bump Waveform Half sine wave
Bump Peak Acceleration(g) 4-150 5-100
Bump Pulse Duration (ms) 2-30 3-30
Bump Rate(Times/Min) 10-120
Overall Dimension(mm) 3000×1150×850 3300×1150×850 3500×1200×850 3800×1300×850 4000×1450×850 4500×1650×850 5500×2000×850 6000×2200×850
Weight (kg) 2000 2500 3000 4000 4500 5000 6000 7500
Installation Condition
Environment Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense
Power AC220V±10%, 50Hz
Air source ≤1MPa
Floor No special foundation is required for installation, but a smooth cement floor is required. 800 ~ 1000mm working distance are reserved around the equipment
Standard MIL-STD-810F IEC68-2-27
Hope to establish business relation with you sincerely. If you want to know more information about our products, kindly visit our website:
www.creditcme.com. Or feel free to contact me:
echo@creditcme.com