P18: 200A double ratio voltage output AC current clamp

The P18 AC current clamp is a general purpose 200A AC current clamp ct designed for use with DMMs, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P18 clamp ct has an integral 2.5m lead terminated.
FEATURES
Holding wire diameter: φ18mm;
Frequency 10Hz-2MHz Bandwidth;
High times harmonic measurement;
Conforms to EN 61010, 600V CAT III;
Low phase shift for power measurement;
Improved ergonomic design & easy operation;
High precision 0.1% for current measurement;
Basic parameters :
Ratio:1000:1 or 2000:1 (customized)
Accuracy class:0.1%, 0.2%
Primary current:0 - 10A AC and 0-200A AC
Secondary current:0 - 100mA AC and 0 - 200mA AC
Load capacity:≤20Ω, standard 4Ω
Frequency range:10Hz-2MHz
Max. Jaw opening (mm):18
info@gfuve.com
86-15910663251
https://www.gfuvegroup.com/ac-current-clamp/200a-double-ratio-voltage-output-ac-current-clamp.html